PVC Strip Curtain Cost Guide UK 2026 — Prices, Installation & Buying Advice

Last updated: April 2026

This comprehensive cost guide covers everything you need to know about PVC strip curtain prices in the UK — from standard strips to specialist freezer and welding grades, installation costs, and how to calculate your return on investment. Whether you're fitting a single doorway or outfitting an entire warehouse, use this guide to budget accurately and buy smart.

What Affects the Price of PVC Strip Curtains?

PVC strip curtain pricing is influenced by several key factors:

  • Strip thickness: Thicker strips cost more but last longer in demanding environments.
  • Strip width: Wider strips (200mm, 300mm) cost more per strip but fewer are needed per opening.
  • Grade: Standard clear is cheapest; polar, anti-static, and welding grades command a premium.
  • Made-to-measure vs. standard: Pre-cut kits are economical; bespoke sizes cost slightly more.
  • Opening size: Larger openings require more material and stronger brackets.
  • Quantity: Bulk roll pricing is significantly cheaper per metre than pre-cut strips.

PVC Strip Curtain Prices by Type — UK 2026

Type Typical Grade Price Range (per metre run) Best For
Standard Clear 1mm – 2mm £8 – £18 per metre run Domestic, light commercial, insect control
Heavy Duty Clear 3mm – 4mm £18 – £35 per metre run Industrial, warehouse, forklift traffic
Polar / Freezer Grade 2mm – 3mm (low temp) £20 – £40 per metre run Cold stores, walk-in freezers, chilled rooms
Anti-Static 2mm – 3mm £25 – £50 per metre run Electronics, cleanrooms, flammable zones
Welding Grade (Amber) 2mm – 3mm £30 – £55 per metre run Welding bays, UV/IR protection
Made-to-Measure (any grade) Varies Add 10–20% to grade price above Non-standard openings, bespoke requirements

Prices quoted are per metre run of finished curtain width, based on standard 100mm wide strips with 20% overlap.

Price by Strip Width and Thickness

The table below shows typical strip prices per strip (linear metre length) for common widths and thicknesses:

Strip Width 1mm Thick 2mm Thick 3mm Thick 4mm Thick
100mm £1.20 – £1.80/m £1.80 – £2.60/m £2.80 – £3.80/m £3.50 – £5.00/m
200mm £2.20 – £3.20/m £3.20 – £4.80/m £5.00 – £7.00/m £6.50 – £9.00/m
300mm £3.00 – £4.50/m £4.50 – £6.50/m £7.00 – £10.00/m £9.50 – £13.00/m

Complete Kit Pricing vs. Bulk Roll Pricing

Complete Door Kits

Ready-to-fit PVC strip curtain kits include a mounting rail, hooks/clips, and pre-cut strips. They're ideal for one-off installations and standard-size doorways.

Opening Width Opening Height Standard Kit (2mm clear) Heavy Duty Kit (3mm clear) Polar/Freezer Kit (2mm)
900mm (standard door) 2,100mm £35 – £55 £55 – £80 £65 – £90
1,200mm 2,400mm £50 – £75 £75 – £110 £85 – £120
2,000mm 2,500mm £90 – £140 £140 – £200 £160 – £220
3,000mm 3,000mm £160 – £250 £240 – £360 £280 – £400
4,000mm (large access) 3,500mm £250 – £400 £380 – £560 £420 – £600

Bulk Roll Pricing

If you're fitting multiple openings or want to cut strips to custom lengths, buying PVC strip material by the roll offers significant savings. Typical roll pricing:

  • 50m roll, 100mm x 2mm (standard clear): £80 – £120 (approx. £1.60–£2.40/m vs £2.50+/m pre-cut)
  • 50m roll, 200mm x 2mm: £140 – £200
  • 50m roll, 200mm x 3mm heavy duty: £200 – £300
  • 50m roll, 200mm x 2mm polar grade: £180 – £260

Bulk buying is most cost-effective when fitting 3 or more doorways or when you expect to replace strips regularly.

Installation Costs

DIY Installation

PVC strip curtains are one of the most DIY-friendly commercial fittings available. All you need is a drill, spirit level, wall plugs, and screws. Installation time is typically:

  • Single standard doorway: 30–60 minutes
  • Large industrial opening (3m+ wide): 1–3 hours

DIY installation cost: effectively zero beyond your own time.

Professional Installation

If you prefer professional fitting, most handymen or general contractors can install PVC strip curtains. Typical rates:

  • Single doorway fitting: £50 – £100 labour
  • Industrial large-opening fitting: £100 – £250 labour
  • Multiple openings: negotiate a day rate (typically £200 – £350/day for a competent contractor)

Specialist PVC door installers may charge more, but for a straightforward fitting, a general handyman is perfectly capable.

Factors That Affect Your Final Cost

  1. Number of openings: Volume discounts apply when fitting multiple doorways — always ask your supplier.
  2. Mounting surface: Steel lintels, concrete, and blockwork all require different fixings. Steel fixings to an existing frame are quickest; drilling into concrete adds time.
  3. Access height: Openings above 3m may require scaffolding or a platform — factor in hire costs.
  4. Specialist grades: Polar, anti-static, and welding PVC all carry a premium over standard clear. Budget 30–80% more depending on grade.
  5. Frequency of replacement: High-traffic industrial use means strips wear faster. Factor replacement strip costs into your total cost of ownership.
  6. Delivery: PVC curtain kits typically ship free to UK mainland addresses. Remote locations (Scottish Highlands, Islands) may incur surcharges.

PVC Strip Curtains vs. Alternative Solutions

Solution Typical Cost Pros Cons
PVC Strip Curtains £35 – £600+ Low cost, DIY fit, hands-free access, low maintenance Not fully draught-proof; strips need periodic replacement
Roller Shutter Door £800 – £4,000+ Excellent security and insulation Must be opened and closed; not hands-free; high cost
High-Speed (Fast Action) Door £3,000 – £12,000+ Excellent seal, fast opening, hands-free Very high cost; requires power; maintenance contracts
Air Curtain / Fly Screen £150 – £500 Good insect/draught control; fully open access Ongoing electricity cost; less effective than PVC for cold containment
Flexible Swing Doors £200 – £800 Good thermal seal; impact resistant Higher cost than strips; requires contact to open

For most commercial and light-industrial applications, PVC strip curtains offer the best value — especially when frequent access is needed and budget is a consideration.

Energy Savings ROI — Is It Worth It?

One of the most compelling reasons to invest in PVC strip curtains is the energy saving potential. Here's a realistic ROI calculation for a common scenario:

Example: Cold Room Doorway

  • Opening: 1.2m wide × 2.4m high
  • Temperature differential: 20°C (room at 20°C, cold room at 0°C)
  • Access frequency: 40 passes per day
  • Without PVC curtain — estimated cold air loss per pass: significant heat exchange event
  • With PVC curtain — estimated heat loss reduction: 65–75%
  • Estimated annual refrigeration energy saving: £300 – £800 depending on system efficiency
  • PVC kit cost: £85 – £120
  • Payback period: 6–12 weeks

Example: Heated Workshop Doorway

  • Opening: 2m wide × 2.5m high
  • Gas heating cost: £0.08/kWh
  • Heat loss reduction estimate: 60–70%
  • Estimated annual gas saving: £200 – £500
  • PVC kit cost: £90 – £140
  • Payback period: 3–8 months

Beyond direct energy savings, PVC strip curtains also reduce wear on heating and cooling equipment, potentially extending system life and reducing maintenance costs.

Where to Buy PVC Strip Curtains in the UK

We supply PVC strip curtains direct to businesses and consumers across the UK. Browse our range:

All orders ship free to UK mainland addresses. Most standard items are in stock for next working day despatch.

Summary: PVC Strip Curtain Budget Guide

  • Small domestic doorway kit: £35 – £60
  • Standard commercial doorway kit: £60 – £120
  • Large industrial opening kit: £150 – £400
  • Freezer / polar grade premium: +20–40% vs standard
  • Specialist grade (anti-static / welding): +40–80% vs standard
  • Professional installation: £50 – £250 per opening
  • DIY installation: Free (30–90 minutes)
  • Typical energy payback: 3–12 months